Fill filling machine/馅料灌装机 HS-6000-I
本机是整合了国内外各种型号灌装机的优点，结合我国行业的实际情况，改进创新研制出适合粘稠度较高的馅料装填产品—真空定量灌装机。该机结合我国馅料行业的实际情况，根据食品行业的要求，我们采用了符合国家食品要求的优质304不锈钢材料，采用叶片旋复方式输送馅料，该方式具有低转速、高效率、轮廓曲线特殊的的特点，有效降低了摩擦和冲击，有效控制了使用过程中的热积累，解决了灌装速度和效率匹配问题，降低了馅料压力，最大程度上减少了馅料破坏现象，保证馅料质量，本机可单机工作，也可与热合机、封口机、包装机组合实现自动化生产，是您升级换代的优选设备。（This machine integrates the advantages of various models of filling machine at home and abroad, combined with the actual situation of Chinese industry, improves and innovatively develops suitable filling products with high viscosity- -vacuum quantitative filling machine. This machine combined with the actual situation of the Chinese filling industry, According to the food industry requirements, We use high quality 304 stainless steel materials meeting national food requirements, Transfer the filling by blade rotation, The method has the characteristics of low rotational speed, high efficiency and special profile curve, Effectively reduces friction and impact, Effectively controlled the heat accumulation during use, Solving the filling speed and efficiency matching problems, Reduce the filling pressure,Minimimize filling damage, Ensure the filling quality, The local machine can work alone, Automatic production can also be combined with hot machine, sealing machine and packaging machine, A preferred device for your upgrade.）
六、结构简介：该机由机架、料斗、泵腔、真空装置、搅拌装置、电机减速机及操作控制系统组成（Structure introduction: the machine consists of the rack, hopper, pump chamber, vacuum device, mixer device, motor reducer and operation control system）。
1.关于机架（About the Rack）
The overall frame is made of high quality 304 stainless steel welding.
The hopper is articulated on the platform of the rack and secured to the rack by its own locking device. Release the locking device, the hopper can be flipped around the hinge shaft and placed on the
rack platform, when the routine maintenance of the filling machine can be performed. To ensure continuity of the filling machine, the hopper volume is designed at 220 liters according to the user usage.
3.关于泵腔（About the Pump Cavities）
The pump chamber is located below the hopper, mainly composed of the pump body, rotor, blade, outer stator, pump cover, etc. It is the core of the filler and driven by the motor. When running the single machine alone, changing the conveying speed and the filling capacity can be changed. When working online, adjust the conveying speed of the pump to match the needs of the packaging machine at any time, which can change the product quality and fullness. If the conveying pump will wear during the long use process, the gap between the parts will increase, and the volume efficiency will be reduced accordingly. In order to reduce the energy consumption and ensure the normal operation of the machine, please replace the damaged parts in time. The fast and slow wear rate of the delivery pump depends on the characteristics of the filling itself produced by each user.
4.关于真空装置（about the vacuum device）
The machine selects German Puxu vacuum pump or domestic brand water circulating pump, selected according to different working conditions
and product status, its main function is to assist the filling of the material, and can remove the shallow bubbles on the surface of the material.
5.关于搅拌装置（About Mixing Device）
The mixing device is powered by the gear, passing the mixing shaft, the gear shaft and the mixing assembly to the scraping plate that moves along the inside counterclockwise to complete the scraping material action, and the auxiliary materials can enter the pump chamber smoothly.
6.关于电机减速机（About the motor speed reducer）
During production and operation, attention should be paid to observe whether the reducer is running normal, whether there is abnormal noise, and often clean the oil pollution and overburden to facilitate heat dissipation. Lube oil shall be replaced regularly and can be replaced every 12 months or 5000 working hours for a long time, running every 2-3 weeks.